Hi Speed Pro Heat Mv Gw Bronze Grey

Flex: 110, adjustable according to your varying needs.

Last: 100mm

Weight per pair: 4340g

Canting : Lateral cuff tilt adjustment of +/- 1° to adapt to the morphology of the lower leg.

Buckles: The buckles can be adjusted in 3 positions to give more or less room to your calves.

Materials:

- Shell: Polyurethane

- Fastening: 4 buckles, 100% Aluminium

- Thinsulate thermal insulation

Technology:

Pre-Shaped Full Custom Liner: The liner is fully thermoformable (outer upper/padding and tongue). Its uniqueness is due to a specific construction that allows the malleoli, metatarsal (1st and 5th) and navicular areas to be highly thermoformable to perfectly fit the shape of the foot - while the rest of the upper retains its properties, for a perfect fit. This ensures excellent support and therefore a very high level of technicality.

Generative Design Structure: The Generative Design is a unique Rossignol technology. This is part of its DNA. This structure allows for material thickness optimisation: it is stiffer on the lower part of the shell and on the rear part of the cuff. It is composed of different thicknesses, for optimised weight. It combines perfectly with Dual Core technology.

Dual Core Carbon: The DUAL CORE technology reinforces the inner side of the collar and thus provides a better hold in curves and more support.


The Hi-Speed Pro Heat is fitted with a heating system that can be adjusted via Bluetooth thanks to the THERM-IC app, that you can download for free on your smartphone, or directly on the boot, thanks to a button. The app ensures easy temperature adjustment and offers two modes to optimize battery life. For more information, go to www.therm-ic.com

Usage advice:

Starting the batteries - Batteries must be charged before first use.

1. Connect the USB cable. The charge indicator will light up green. Then plug in the 2 connectors that are connected to each boot, the charge indicator will turn red, and charging will start.

2. When the batteries are charged, the charge indicator will turn green. Charging will stop automatically. Charging times are from 4 to 6 hours

3. Disconnect the 2 boot connectors from the USB cable

4. Tidy the connectors into the boots. All precautionary measures related to the use of batteries are given in the user manual for the boots and can be accessed via the following link.

On the side of the liner is the "control unit" of the heating system.
It has 4 positions: ON/OFF position, and 3 heating levels

The number of LEDs lit corresponds to the heating level.

When no LED are lit, the heater is OFF.

Startup: Press the "+" or "-" button for 1 second to set the heater to position 1

Stop: To stop the heating, press the " - " button for 3 seconds.
Control: To turn up the heat, press the "+" button; the heating will go up a step and 1 additional LED will light up.

To turn down the heating, press the " - " button; the heating will drop down one notch, and 1 LED will turn off.

POSITION 3 = HIGH HEAT Battery life = 4/5 hours

POSITION 2 = MEDIUM HEAT Battery life = 8/9 hours

POSITION 1 = MODERATE HEAT Battery life = 17/19 hours

Two modes of use can be chosen:

- ECO MODE: this mode lets you choose a heating period: for example, 4 minutes heating followed by 2 minutes without heating.

- MOVEMENT MODE: the heater starts every time the skier stops

The batteries can be recharged after each use or at your convenience